The short answer: it fits V1–V5 Single Nipper buggies
The Out N About Front Rider Pack is designed specifically for Nipper V1–V5 Single buggies. If your buggy falls outside that range, or you have a double, this pack isn't the right fit. The product listing doesn't confirm compatibility with other models, so check your buggy's version before ordering.
One practical catch: you'll need a socket or ratchet set to fit the Front Rider, and it's not included. That's not a dealbreaker, but it's worth knowing before the box arrives.
What you're actually buying
- Out N About Front Rider Pack (V1-V5) - Single: The Front Rider turns your Nipper V1–V5 Single buggy into a ride-on adventure for siblings. This confirms the intended buggy range and that it's a ride-on accessory, not a seat replacement.

Out N About Front Rider Pack (V1-V5) - Single - Out N About Front Rider Pack (V1-V5) - Single: Includes a sturdy handle for your child to hold on to, foot pegs that screw onto the wheel, wheel covers to protect little feet from moving parts, a single foot plate, and a new front fork. These parts show it's a complete kit for attaching to the front of the buggy, not just a board.
- Out N About Front Rider Pack (V1-V5) - Single: A socket/ratchet set is required to fit the Front Rider and is not included. You'll need your own tools to install it, so factor that into your decision.
When a front rider makes sense for your family
A front rider is for tired toddlers who need a break during school runs, family walks, or days out. It lets them hop on and ride while you keep moving, rather than stopping to carry them or wrestle with a separate stroller.
It's not a substitute for a proper seat or a safe-sleep solution. The supplied information doesn't state a maximum child weight or age, so you'll need to use your judgement and follow the buggy's own limits. If your child is too big for the foot plate or can't hold the handle securely, it's probably not suitable.
Front Rider Pack vs other Nipper accessories
The Front Rider is one of several ways to add ride-on capacity. Here's how it compares to typical alternatives, based on what the catalog confirms.
- Front Rider Pack (this product): Attaches to the front of Nipper V1–V5 Single buggies. Includes handle, foot pegs, wheel covers, foot plate, and new front fork. Requires a socket/ratchet set for fitting.
- Rider boards (generic): Usually attach to the rear of the buggy. The supplied information doesn't confirm whether a rear board is available for your Nipper, so check before assuming.
- Second buggy or double: A bigger investment, but may suit if you regularly carry two children who both need proper seats.
What the listing doesn't tell you
The supplied information doesn't include a maximum child weight, age range, or detailed fitting instructions. It also doesn't confirm whether the Front Rider is compatible with Nipper Double models or older versions outside V1–V5. If you need those specifics, contact the retailer or manufacturer before buying.
Assembly requires a socket/ratchet set, and the process involves screwing foot pegs onto the wheel and fitting a new front fork. If you're not comfortable with basic tool use, ask someone who is, or have a shop fit it for you.
Before you order: a quick compatibility check
- Check your buggy version: Look for a label or serial number on your Nipper. The Front Rider fits V1–V5 Single only.
- Confirm it's a Single: Double models aren't listed as compatible in the supplied information.
- Find your socket set: You'll need a socket or ratchet set to fit the Front Rider. It's not in the box.
- Consider your child's size: No weight limit is supplied, so use the buggy's own limits and your child's ability to hold the handle safely.


