How to Attach a BIBS Braided Pacifier Clip Safely
By UK Baby Centre | Published: 2026-11-05
Category: Guides pratiques
Learn the safe way to attach a BIBS braided pacifier clip to clothing, plus the one mistake that lets a dummy clip become a hazard.
Quick answer
Attach the metal clip firmly to a flat, reinforced piece of your child’s clothing — not to the pacifier, a strap, or a loose hem — and check that the fabric cannot bunch or pull free. The clip should hold the pacifier off the floor while still releasing if it is tugged.
Why the clothing attachment point matters more than the clip
A pacifier clip only works as intended when the metal clip bites into fabric that will not tear or stretch away. Thin jersey hems, ribbed cuffs, and decorative trims can slip out of the clip’s teeth, which is the most common reason a clip ends up on the floor with the pacifier still attached.
The BIBS Braided clip is designed to attach to a piece of clothing and prevent the pacifier from getting lost or dirty by falling to the ground. That description assumes a secure fabric anchor, so treat the attachment point as the safety decision, not an afterthought.
When a clip is not the right choice
Skip the clip when your child is asleep unsupervised, when the clothing has no suitable flat seam, or when the clip’s metal teeth show any damage. A clip is an everyday convenience for home, the stroller, and out-and-about use — not a sleep aid or a substitute for supervision.
How to attach the clip, step by step
- Choose a flat, reinforced clothing seam: Pick a shoulder seam, a flat side seam, or a reinforced hem on a bodice or trousers. Avoid ribbed cuffs, thin hems, and anything with lace or a loose thread. If you can pinch the fabric and it stretches easily, choose another spot.
- Open the metal clip fully: Squeeze the clip open and slide the fabric into the jaw so the teeth close on a double layer where possible. Check that no fabric is caught outside the teeth before you let go.
- Close the clip and tug gently: Let the clip snap shut, then give the braided strap a gentle pull. The fabric should hold without bunching or pulling the garment out of shape. A clip that slides along the seam is not secure — reposition it.
- Attach the pacifier end and check the loop: Fasten the pacifier to the clip’s loop according to the clip’s design, then check that the loop is closed and cannot slip off the dummy. The pacifier should hang freely without twisting the braid.
- Do a final safety check before use: Confirm the clip is not attached to a cord, ribbon, or the pacifier itself, and that the braid shows no fraying or loose threads. Retire the clip if the metal teeth are bent or the braid is worn.
Product facts
- BIBS Pacifier Clip (Braided) - Blush/Ivory: The BIBS Pacifier Clip (Braided) in Blush/Ivory attaches with a metal clip to a piece of the child’s clothing. The metal clip needs a firm fabric edge to grip, so choose a flat seam rather than a soft or decorative trim.
BIBS Pacifier Clip (Braided) - Blush/Ivory
